Logo Kwik Plumbing

Tag Archives: Plumbing

How To Keep Plumbing Issues At Bay?

There are numerous things to do so as to keep plumbing issues at bay. Here are some promising considerations that will certainly work wonders.

Fixing leaks immediately – If you notice a leaky faucet be sure to fix it right away. Waiting to do so could result in possible water damage and higher water bills. Also that drip noise never any fun to listen to.

Water usage – Did you know that you can easily save money by changing some of your water usage habits?

Conserve water and money by doing some or all of the following:

  1. Turning off the faucet when brushing your teeth.
  2. Run the dishwasher only when it’s full.
  3. Take 5 minute showers.
  4. Flush only when the toilet contains solid waste.
  5. Clean your laundry in economy mode or only with cold water.

Update your bathroom – Updates such as replacing older faucets or shower heads can have a significant impact on your bathrooms utility and can lower your water bill.

Use the garbage disposal properly – Avoid putting fibrous foods such as celery, corn husks, onions as well as egg shells, potato peels, and coffee beans. Run water while you are using the disposal.

Perform annual pipe inspections – It is wise to mark down a quarterly pipe inspection on your calendar. Check for leaks or signs of water damage under sinks, in your basement, under your water heater, and in your crawl space if you have one. If you find a leak or corrosion on the pipes it would be best to approach a licensed plumbing expert.

Say No To Plumbing Issues This Spring

April showers bring May flowers and the onset of spring, and since it’s March,  it’s coming close for “spring cleaning.” Here are some maintenance tips to say NO to plumbing issues this Spring:


  1. Pour some water into infrequently used drains to fill the trap and avert odors from entering the house.
  2. Snake slow floor drains to make certain they will carry away water quickly in case of a flood.
  3. Inspect exposed pipes under sinks and in the basement for signs of leaks.
  4. In case of the availability of a sump pump, ensure it functioning by pouring a few buckets of water into the sump pit. It should turn on quickly, discharge the water then shut off without any issue.
  5. If you live in an area where sewers sometimes back up into homes, install a backflow valve in the floor drain. This device will prevent future backups.


  1. Inspect the temperature setting on the water heater.
  2. Carefully drain several gallons from the water heater tank to flush out corrosion causing sediment, which reduces heating efficiency and shortens the life of the heater.
  3. Consider replacing a water heater if more than 15 years old.
  4. Ensure flammables are not stored near the water heater or furnace.
  5. Check dishwasher, washing machine and ice maker supply hoses for bulges or leaks.
  6. Clean out washing machine lint trap, if equipped, and place a wire trap or a piece of pantyhose over the end of the hose that drains the washer.


  1. Check faucets for drips or leaks. Ensure that all drains have strainers to prevent hair, soap and debris from clogging the drain lines.
  2. Check toilets for hidden leaks.
  3. Inspect tank and bowl for cracks or leaks.

Facing Pilot Light Issues?

Gas heaters, no matter they are used to warm up the water or air in a home, rely on a pilot light to trigger the flame of the actual heater. If this light ever goes out, the heater has no way of actually turning on to heat the air or water that the heater circulates to warm the house or other elements. Let us now take a brief look into how to maintain the heater and diagnose everyday problems with pilot lights.

# Size of Flame – Yes, it is a bit strange to suggest a big purchase when we are talking about savings. But if you are not getting enough hot water into your home, if you cannot fill up your bath tub with hot water, or cannot get a normal shower or do dishes, then you probably need a new water heater.

# Corroded Pilot Tip – These water  heaters are typically flat and don’t take up much room. This heats the water right in that unit. It does it very quickly and can cycle much faster than a large heater.

# Bad Thermocouple – This an often overlooked service. Pipe leaks often occur due to frozen water, sediment builds-up or pressure in the pipe. These small pipe leaks can drain the money right from your pocket.

Feel free to give a call to certified professional plumbing experts if the pilot light is out and fix the issues proficiently!

Finding the Right Plumbing Company in Your Area

It does not matter whether you like in an apartment or home, it you have a kitchen, bathroom, or laundry facility, you are susceptible to face plumbing issues. If you are currently facing any such issues, then you need to find an expert plumber to fix the issue. But, where are you going to find one?

The process of finding a reliable plumbing company definitely does not require rocket science. Many people just open up the yellow pages or take references from friends or neighbors to find a plumber, but things have changed now. Today, searching the best plumber in your area is different and difficult. Today, the first place people turn to look for a plumber or plumbing company is Google or other search engines.

While exploring the database of plumbers, you need to pay special attention to the reviews. You do not want to be stuck with some worthless plumber or company that doesn’t seem to be able to do much of anything. If you cannot find a good review for a plumbing company in your area, you can simply ask to speak with one of their previous clients. It will give you a good idea about the skills, professionalism, and expertise of the plumbing company.

Once you ensure that company has reputation, and skills, you should go ahead and ask for their license and insurance. Always ensure that the company has license or permission to work in your state.